Supplies Needed: 12x12 card stock( I prefer double sided) hole punch 2 buttons or brads 18 inches of ribbon Paper trimmer Step 1: You are going to need to cut 12 strips of paper. 4 at 1x12, 4 at 3/4x11, and 4 at 1/2x10. You will also need a a strip at 1x6 Step 2: Fold into desired loop, you are just doing this to get an idea of where you want to punch your holes. Step 3: You are going to want to punch holes all the way through each loop. I use my making memories hand punch, but any punch will work.I punch the first one as a guide, and then overlap it onto the other strips it size. You will also need to punch a hole into the smaller piece, but this hole doesn't need to be on the top as well. ( so instead of having three holes in it, it will only have two) Step 4: You are going to thread your ribbon through your button. This is going to be on the inside of your small loop.This is what holds your ribbon together. Step 5: Start to thread your other loops, starting with the smallest loo...